Key Takeaways
- The Dab Rite measures banger surface temperature using infrared so you dab at the exact right temp every time.
- Target range is 480–550°F for flavor; 550–620°F for bigger clouds.
- Setup takes under 60 seconds: pair, calibrate offset, point the laser at the banger.
- The Dab Rite alerts via vibration/LED when the banger hits the temperature you set.
Quick Answer: Using a Dab Rite is a 4-step process: (1) Turn it on and set your target temperature (480–550°F for low-temp flavor, 550–620°F for cloud dabs). (2) Point the infrared laser at the bottom of your quartz banger as you heat. (3) Watch the live readout drop as the banger cools after torch-off. (4) Drop your dab when the Dab Rite vibrates or shows the target temp on screen. The infrared sensor reads the actual banger surface temp instead of guessing by sound or color.
What Is a Dab Rite?
The Dab Rite is an infrared temperature reader designed specifically for dabbing. It measures the actual surface temperature of your quartz banger in real time, so you can drop your concentrate at the exact temperature that produces the flavor or vapor experience you want. No more guessing by waiting times, color, or sound.
Dab Rite v1.2 IR Thermometer Dab Temp Reader
- Light & Sound Alerts
- Built-in Emissivity Settings
- LED Guide Light
- Automatic Shut-off After 5 Minutes of No Use
- Comes with Black Silicone Sensor, Carp Cap and Marble Holder Covers
Step-by-Step: How to Use a Dab Rite
- Power on and pair: press the power button on the Dab Rite. If using the Pro version, pair with the companion app via Bluetooth.
- Set your target temp: low-temp dabs run 480–550°F; mid 550–600°F; high (cloud) 600–620°F. Anything above 650°F wastes concentrate.
- Heat your banger: torch the quartz banger evenly until red-hot (about 20–30 seconds).
- Point the laser: aim the Dab Rite’s IR sensor at the bottom of the banger from 2–4 inches away. The live temp reading appears on the screen.
- Wait for the cool-down: the banger temp drops about 50°F every 10–15 seconds. Watch the display.
- Drop the dab: when the Dab Rite shows your target temp (and the alert triggers), drop the concentrate into the banger.
- Cap and inhale: place your carb cap on the banger and slowly inhale.
Our Test — What We Learned From 6 Months of Dab Rite Use in the Shop
From running a Dab Rite during in-shop testing of new bangers:
- Best flavor window: 500–530°F on a clean quartz banger. Hotter than 540°F and the most volatile terps start vanishing.
- Most common mistake: measuring the side wall instead of the floor of the banger. The floor reading is what matters — that’s where the concentrate sits.
- Underrated feature: the cool-down timer. Heat once, watch the temp drop, drop your dab. Repeatable results every session.
- Skip: using a timer instead of the Dab Rite. Banger thickness and torch output vary too much for time-based dabbing to be consistent.
Bottom line: a Dab Rite (or Terpometer IR) pays for itself within a month by eliminating wasted dabs from too-hot bangers.
Dab Rite Pro IR Thermometer
- 1 x Dab Rite™ PRO Unit
-
1 x Dab Rite PRO Microfiber Cloth
-
1 x Deluxe Carrying Case
-
1 x Black Silicone Carb Cap Holder
-
1 x Black Silicone Marble Holder
-
1 x Black Silicone Sensor Cover
-
1 x Low Profile Sesh Light™ Cover
-
1 x Beveled Dome Sesh Light Cover
-
1 x Quick Start Guide
-
1 x USB-C Charging Cable
-
1 x 1 Year Limited Warranty
What Temperature Should You Use With a Dab Rite?
- 480–520°F — Cold start range. Drop concentrate into a cold banger, then heat slowly. Best flavor, slowest vapor.
- 500–540°F — Low-temp flavor. The sweet spot for most premium concentrates. Smooth, terpy, minimal reclaim.
- 540–580°F — Mid-temp balanced. More vapor, some flavor loss. Good for shared sessions.
- 580–620°F — Cloud chasing. Maximum vapor production. Flavor is muted; bigger hits.
- Above 650°F: avoid. Wastes concentrate and damages the quartz over time.
Why Most Dab Rite Tutorials Get It Wrong
Most guides treat the Dab Rite like a stopwatch — “wait 30 seconds, then dab.” That defeats the entire point of an IR reader. Banger mass, torch output, ambient temp, and how clean your quartz is all change the cool-down rate. Three giveaways the tutorial is junk: (1) Treats temp as a fixed wait time. (2) Doesn’t mention measuring the floor vs the side of the banger. (3) Skips the calibration offset step.
The Dab Rite’s real value is that it tells you the actual surface temperature on this specific banger right now. Use that reading, not a stopwatch.
Dab Session Essentials
-
TERPOMETER IR Gen2 – Infrared Dab Temp Reader
Original price was: $179.99.$159.99Current price is: $159.99. -
Roots Glass Full Weld Tower Slurper
Original price was: $49.99.$34.99Current price is: $34.99. -
Roots Glass Full Weld Terp Slurper Kit
Original price was: $59.99.$39.99Current price is: $39.99. -
Roots Glass Full Weld Terp Taster
Original price was: $49.99.$39.99Current price is: $39.99.
Maintenance & Battery
The Dab Rite is USB-rechargeable. A full charge lasts about 2 weeks of daily use. Keep the IR lens clean — a smudged lens reads low and you’ll under-dab. Wipe the lens with a microfiber cloth and a drop of isopropyl alcohol every few weeks.
If the readings start drifting (consistently 30–50°F off your usual sweet spot), recalibrate using the offset menu. Calibration drift over months is normal — recheck against a known-temp source if you have one.
Banger Cleaning & Care
Frequently Asked Questions
What temperature should I set my Dab Rite to?
For flavor-focused dabs, set 500u0026ndash;530u0026deg;F. For balanced flavor and vapor, 540u0026ndash;580u0026deg;F. For cloud chasing, 580u0026ndash;620u0026deg;F. Most users land at 510u0026deg;F as their default after experimenting.
How accurate is the Dab Rite?
Within 5u0026ndash;10 degrees Fahrenheit when measuring the banger floor from 2u0026ndash;4 inches away with a clean lens. Accuracy drops if the lens is dirty or if you measure the side wall instead of the floor.
Should I measure the side or bottom of the banger?
The bottom (floor) of the banger. That is where your concentrate sits, so floor temperature is what determines vaporization quality. Side-wall readings can be 30u0026ndash;60u0026deg;F off from the actual floor temp.
How do I know when to drop my dab?
Watch the Dab Riteu2019s live display. As the banger cools after torch-off, the temperature drops about 50u0026deg;F every 10u0026ndash;15 seconds. Drop your concentrate when the display shows your target temperature.
Do I need a Dab Rite if I already use a timer?
Yes u0026mdash; a timer assumes the banger cools the same way every session, which is not true. Banger thickness, torch heat, room temp, and quartz cleanliness all change cool-down time. An IR reader gives you the actual surface temp instead of an estimate.
