Get 10% off your first order — your discount code will be emailed to you after signup!
Free Shipping on orders over $100·Ships in less than 48 hours from the US · Arrival Guarantee
Glass tops and replacement attachments for the Focus V Carta 2. Better airflow, better cooling, real glass — not the OEM plastic. Sized to fit OEM threads exactly, no adapters needed.
The Focus V Carta 2 is a serious portable e-rig. The stock glass top is functional but limited — it’s molded plastic-and-glass, not all-borosilicate, and the airflow is conservative. Aftermarket glass tops are made of all-borosilicate, deliver smoother hits, and look like proper glass instead of OEM plastic.
Glass tops are wear parts — swapping them doesn’t typically affect device warranty. But always check Focus V’s current terms before assuming.
No — Carta 1 and Carta 2 use different threads and chamber sizes. Don’t cross-fit.
Twist counterclockwise to remove the OEM glass. New top threads on the same way. Finger-tight only — the threads are not designed for force.
Same as any rig — iso and salt, soak, rinse. Don’t put glass in the heating base. Wipe joint dry before reattaching.
The Focus V Carta and Carta 2 are NOT cross-compatible at the glass top level. The Carta 2 has different threads, a redesigned atomizer, and a slightly different chamber depth. Tops made for the Carta 1 will not seal correctly on the Carta 2.
Focus V occasionally releases limited-edition Carta 2 variants (Mango Edition, etc.) with the same threading as standard Carta 2. Aftermarket glass tops fit those too. The exception is true co-branded special editions — always verify before buying.
The OEM Carta 2 top is functional but mostly opaque/molded. Aftermarket borosilicate glass tops show the vapor as it forms, look better, and tend to deliver smoother hits because of better airflow tuning.
Same as any rig — iso and salt, soak, rinse. Wipe the threads dry before reattaching to avoid corrosion on the device side.
Glass tops are wear parts — swapping doesn’t typically affect device warranty. Always check Focus V’s current terms.
No — completely different thread spec and geometry.
Showing all 3 resultsSorted by popularity
Verified OwnerI really like this rig but I was expecting it to be a little bigger. The description said 9 inches but I would say it’s more 6 inch range . I attached photo with it next to my 8 inch bubbler to show size. Most of my rigs are 4 to 6 inch range. I just wanted something a bit bigger. If was looking for something in the 6 inch range. This would be perfect. I would recommend downsizing to a 10 mm adapter. It’s not a necessity but I feel it makes the draw smoother but it’s a great rig for $100 price point. It seems to be built well and have enough to be used with an Enail.
Verified OwnerGot what I wanted, parts were safely wrapped, overall great product. Didn’t come broken, nothing out of the ordinary.
Verified OwnerFast shipping and great packaging of the piece. The rig hits exactly as I hoped, with the tornado effect. The glass itself could be thicker in general. But mostly for further peace of mind. For this model, I wish it were the same height as the "double wu" rig. Worth it and great purchase experience. Especially the email customer service!
stopped torching my quartz cold cuz of this thing. reads quick and the pro version is worth the extra over the v1
the wart actually keeps me from burning my fingers when i pull the bowl, simple but smart. fits 14mm tight
love using the pivot dry but the water makes it 10x smoother, snaps right on 🤘
the opal embed catches the light crazy good, and the thick fab feels solid in the hand. way nicer than the stock peak top fr
ok the recycler action on this thing is mesmerizing, watching the water cycle while you rip is half the fun. RBR colorwork is clean too, heavier than my old hammer and the pulls are way smoother. def my new daily 🔥
Get 10% off your first order — your discount code will be emailed to you after signup!